JPL-101 acid oxidation rust additives in addition: green smoke no taste, not to hurt the substrate, no hydrogen embrittlement, enhanced surface adhesion, temperature use, use 2-4 times the cost of recycling is low. Jie Puli fee of Health / URL: 
 First, the product advantages: 
 1, the product is environmentally friendly products. Significantly reduced compared with the acid mist and the pungent odor, volatile acid fully inhibited, both to improve the working environment and reduce air pollution. Rust does not contain toxic liquid, hazardous substances, is not toxic, harmful emissions, resulting in the abolition of rust solution through recycling and comprehensive utilization of less emissions, the use of temperature -10 ~ 35 ℃ ambient temperature can be the best use of temperature is 10 ~ 30 ℃. Passive if my company liquid rust when used with liquid PH value PH value of alkaline acid passivation solution, after neutralization with as neutral. 
 2, rust cleaning effect. Rust cleaning surface quality can be achieved ≥ Sa2 1 / 2, there is no black film produced, showing true colors of steel. As a clean wash thoroughly, coating after the coating can improve adhesion and finish. 
 3, compared with the acid can improve the steel quality. In the rust cleaning process does not produce "hydrogen embrittlement", does not occur "over loss", even though a long time immersed in the liquid is almost rust-free "weight loss" phenomenon, thus protecting the original mechanical properties of steel and processing performance. Therefore, compared with the pickling liquid rust rust the steel after processing improved mechanical properties. 
 4, reduce labor intensity and cost savings. Compared with the traditional way to use descaling pickling solution can greatly reduce the labor intensity. Because rust pickling liquid compared with the original service life extended several times, the use of high efficiency, so the unit cost price can drop tons Moreover, liquid rust can also be recycled (with additives), and utilization, so that through an integrated Compared with the original calculation of costs will not increase the cost of pickling. 
 5, the product is harmless, do not hurt the skin, beneficial to labor protection. If they inadvertently come into contact with skin or eyes, rinse with water. 
 Second, the preparation method 
 1, the material composition: by weight (water 30% + JPL-101 Rust Remover 1%) + content of 31% HCL70% 
 2, the first green rust powder with water to fully dissolve, stirring about 30 minutes, then stir into the HCL to 30-60 minutes. 
 Third, pay attention 
 1, the use of the tank to be acid. 
 2, if you use the original rust tank, please replace the original bath and thorough cleaning. 
 3, water to rust powder must first be fully dissolved stir, then add HCL to continue stirring. 
 4, the rust that before you degreasing. 
 5, cleaning time: 1-3 minutes of ordinary steel parts, heavy rust 5-10 minutes, 30-50 minutes of high-temperature oxide, special steel 10-40 minutes. 
 6, according to the different sizes of objects rust, rust agent per ton average processing capacity of 25 tons. 
 7, when used for too long, longer time-consuming feeling of rust, or inadequate, replace the rust medicine or use our waste recycling rust agent, can be recycled 2-4 times. Tel: /